- DOUBLE RING BELTS
-
- We have made these same belts for over 50 years. Each
belt is hand cut with a draw gauge from 8-10 oz domestically
tanned "English bridle" leather bends, which make for
extremely durable strapping. This leather is actually tanned
and finished for the horse bridle industry. This vegetable tanned
leather is quite expensive, but worth the difference. Each strap
is worked through 7 steps before it's attached to a solid brass
buckle using solid brass rivets. Color choice is dark brown,
medium brown, burgundy, chestnut, and black. Because dye batches
from the tannery will vary and because computer screens vary,
we do not recommend dependence on these photos for matching color.
All the belt colors can be seen on the one
inch belt page. Custom belts for any buckle you may have
is our specialty.
-
- PLEASE BE AWARE: FOR THOSE WHO ARE NOT FAMILIAR
WITH THIS STYLE BELT.
- THE END OF THE BELT THAT PASSES THROUGH THE RINGS
HAS BEEN CUT OFF, REVERSED, AND GLUED/STITCHED BACK ON. THIS
IS DONE SO THAT THE FINISHED SIDE OF THE LEATHER ALWAYS SHOWS
WHEN WEARING THE BELT.
-
- A:
|
- Our traditional double ring belt 1 ½"wide
on 1 ¾" solid brass rings (natural brass) with reversed
end. Shown in black. Bright nickel finish solid brass rings available.
|
$72.00
|
- B:
|
- Same construction, but 1 ¼" wide belt on 1
½" rings (shown in medium brown)
|
$66.00
|
| C: |
- Same construction, but 1" wide belt on 1 ¼"
rings (shown in dark brown)
|
$61.00
|
-
- Bright nickel rings available for all three widths
-
- All five leather colors available for all styles
-
- NEW - natural undyed belt leather available for
all styles (photo available)
Please click here to learn about ordering.
-
- BELT SIZE
Please determine belt size by measuring a currently used belt.
Pants waist size is no longer a reliable way to determine belt
size.
-
- ALL BELTS ARE MADE TO ORDER
- SIZE IS YOUR RESPONSIBILITY. PLEASE MEASURE. NO
RETURNS.
Measure from point "A" on the buckle to the most used
hole on your current belt. It might not be the middle hole.
This measurement is usually 2 to 5 inches bigger than your pants
waist size. Note that “A” on the top belt is
just inside the buckle end where the swivel tongue meets the
buckle body…..and that “A” on the bottom belt
is at the base of the hook. It’s important that the working
length of the buckle be included in your measurement.
-
Point "B" on the new belt will be the middle of 5 holes
(or loops on some styles).
-
|
